Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Shimano XTR M9000 Rear Derailleur Pulley Set
$35.00
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for XTR RD-M9000 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
Shimano Ultegra 6800 Outer Chainring Bolt and Cap
$51.00
Shimano Chainring Bolts - For use with FC-6800 46t outer chainring - Color: Black - Length: 10 mm - Material: Aluminum - Type: Torx
CeramicSpeed 6903 Bearing (61903)
$126.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm
CeramicSpeed Pulley Wheels for SRAM Eagle, 12s NW
$379.00
SRAM's 1x Eagle component system boasts a twelve-speed cassette. We built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less drag, adding to the power transmitted to the rear wheel while offering greater durability, going longer between replacement intervals. These pulleys are also fully compatible with the SRAM Eagle AXS derailleur. The aluminum pulleys with standard bearings are 34.4% more efficient than stock and use our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The upper and lower pulleys both have a narrow-wide tooth design with 14 teeth each. As the upper and lower pulleys have different tasks, they have different shapes. You'll find they are thus marked, and have directional arrows. These pulleys should be installed with stock SRAM pulley spacers. Save those from your old pulleys before installing CeramicSpeed. The kits come with CeramicSpeed Oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come pre-oiled. The grease can be used on the pulley bearings when riding in particularly harsh environments. In the box: - 2 x 14-tooth pulley wheels - CeramicSpeed Bearing Oil in 15ml dropper bottle - CeramicSpeed Grease in 5ml syringe - Sticker sheet
CeramicSpeed 608 Bearing
$99.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 8mm - Outer Diameter: 22mm - Width: 7mm
CeramicSpeed 6804 Bearing (61804)
$136.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 20mm - Outer Diameter: 32mm - Width: 7mm
CeramicSpeed Oversized Pulley Wheels 17-Tooth
$279.00 - $369.00
Replacement Pulley Wheels for the CeramicSpeed OSPW System. Includes 2 pulley wheels. - Precision-machined aluminum pulleys - For use with CeramicSpeed's Oversized Pulley Wheel System only - Coated races increase bearing service life by increasing hardness of race and reducing corrosion - CeramicSpeed products with coated bearings include a 6-year warranty
CeramicSpeed Pulley Wheels for Shimano 11s
$269.00
Improve the performance of your 11-speed Shimano rear derailleur with pulleys that reduce friction and increase bearing life. Ours are designed to work with less drag, adding to the power transmitted to the rear wheel. - Uses low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. - A set consists of differing upper and lower pulleys: they are marked as such and have directional arrows etched on them so you know exactly how to install them. - These pulleys are compatible with all Shimano 11-speed rear derailleurs except XT or XTR. - The kits come with CeramicSpeed oil in a 15ml dropper bottle. The bearings come pre-oiled. In the box: - 2 x 11-tooth pulley wheels - 4 x spacers - CeramicSpeed Bearing Oil in 15 ml dropper bottle - Sticker sheet
CeramicSpeed OSPW X for Shimano XT/XTR 1x12
$519.00
The OSPW X System for Shimano XT/XTR 1x12 reduces friction by 35-40% compared to stock pulley configurations. The lightweight, custom-molded carbon fiber cage ensures durability. This design allows the use of the same length chain as stock pulleys. The 14-tooth upper and 18-tooth lower pulley profiles ensure stable chain retention while reducing drag. The OSPW X System is developed, designed, and handbuilt in Denmark—and proven globally. Only compatible with 1X specific derailleurs. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/oil: CeramicSpeed Pulley Oil - Compatibility: Shimano XTR M9100-SGS, Shimano XTR M9100-GS, Shimano XT M8100-SGS and SLX M-7100 derailleurs - Cassette Compatibility: Up to a 10-51 tooth range - Spring Tension Settings: 2 spring tension settings - Speed: 12-speed - Discipline: Off-Road In the box: - Complete OSPW System for Shimano XT/XTR 1x12 - CeramicSpeed Pulley Oil, 15 ml - Sticker Sheet
CeramicSpeed 6901 Coated Bearing (61901)
$163.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 12mm - Outer Diameter: 24mm - Width: 6mm
Shimano Ultegra 6800 Front Derailleur Cable Fixing Assembly
$3.00
Shimano Front Derailleur Cable Fixing Assembly
ENVE Seatpost Battery Plug
$20.00
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.
Zipp Carbon Headset Spacer Set
$27.00
Precise spacers keep your headset tight, and provide correct bike handling and component life. Lightweight and precisely parallel, Zipp carbon headset spacers are precision ground to keep your fork secure through every twist, turn and bump in the road. 1-1/8-inch diameter in 4, 8, 12, and 30 mm heights.
Zipp Vuka Alumina Extensions
$60.00
Zipp developed an extensive line of aluminum aerobar extensions to provide the perfect fit for any rider, regardless of size or riding position. The Vuka Alumina Extensions offer three different bends to achieve your ideal fit. - Vuka Alumina Race feature 52mm of rise (175g). The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Vuka Alumina Evo are available with a 70mm (176g) or 110mm (180g) rise. Designed to deliver improved aerodynamics by placing hands closer together and nearer to the rider’s head to start airflow over the rider sooner.
Zipp Vuka Clip Aerobar with Vuka Alumina Extensions
$140.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust. The VukaClip is available with an above-bar or below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market. Features - Fit, security, and adjustability - Above-bar or below-bar mounting system - Compatible with most extensions
Shimano Dura-Ace R9100 Brake Cable Adjusting Unit
$13.00
This is a Shimano Dura Ace R9100 Road Brake Cable Adjusting Unit for BR-R9110-RS and BR-RS9010-RS caliper brakes. - Services one brake caliper, front or rear
Shimano Dura-Ace R9100 Rear Derailleur Cable Adjusting Unit
$6.00
Need a spare Shimano cable adjuster assembly for your Dura-Ace R9100 rear derailleur? You've found it. Making sure this part is in working order can mean the difference between a two-second barrel twist to return your shifting to perfect, or getting out the multi-tool to readjust the cable again and again until it's close enough to get home. Your choice.
Shimano STEPS CITY E6010 Down Tube Battery
$586.99
- BT-E6010 (battery) / SM-BME61 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6010 features easy mounting and release
CeramicSpeed OSPW System for SRAM Red/Force AXS
$519.00 - $619.00
The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting for maximum efficiency. The handbuilt OSPW System has two spring tension settings that offer you customized setup based on riding conditions. This OSPW System is also compatible with the 2020 11-speed SRAM Red eTap derailleurs featuring a clutch. - Pulley wheels: CeramicSpeed 15-tooth upper and 19-tooth lower - Pulley wheel material: aluminum - Cage material: carbon-reinforced PA - Bearing options: CeramicSpeed Standard or Coated - Compatibility: SRAM Red AXS and SRAM Force AXS. 2020 SRAM Red eTap 11-speed derailleur with the orbit clutch. This system is also compatible with the wider-range Force AXS medium cage derailleur - Cassette Compatibility: Fits 12-speed 10-36 tooth cassettes. Fits 11-32 tooth cassettes when used with an 11-speed clutched derailleur - Spring Tension Settings: 2-spring - Speeds: 12-speed - Discipline: Road and Gravel/Cross - Custom tool included for removal of stock cage and securing of OSPW. The factory clutch mechanism will remain intact. There is no damage or modification to the clutch for the installation of the OSPW System In the box: - Complete OSPW System for SRAM Red/Force AXS - CeramicSpeed Pulley Oil, 15 ml dropper bottle - Custom tool for removal of stock cage and securing of OSPW System
Shimano Short Battery Mount External/Internal Wiring
$132.99
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Specialized Carbon Ski-Tip Extensions
$125.00
Specialized's Carbon Ski-Tip Extensions are lightweight and ergonomic, perfect for optimizing your aero position. The 40-degree carbon ski-tip extensions offer 10mm of lateral jog to fit a wide range of arm widths. The 22.2mm outer diameter is compatible with many standard aftermarket aerobar clamps, and at 400mm long, they can be cut to fit your specific reach.
Zipp Vuka Clip Riser Kit
$25.00
Zipp's Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip’s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. - Sold in pairs - Risers cannot be stacked - Includes hardware
Shimano Deore XT RD-M786-GS Rear Derailleur Outer Cage Plate
$16.00
Shimano Deore XT RD-M786-GS Rear Derailleur Outer Cage Plate - "B" fit for SLX RD-M675-GS, Deore RD-M615-GS - OEM outer cage plate for XT RD-M786-GS
Shimano Deore XT M8000 Outer Chainring Bolt Set of 4
$11.00
Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx
CeramicSpeed OSPW System for SRAM eTap
$499.00 - $599.00
Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a technological advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings start at 40%, and the CeramicSpeed Bearings inside offers a 3-5 times longer lifespan compared to standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts. This 17/17-tooth OSPW system for SRAM eTap derailleurs is compatible with up to a 32 tooth cassette and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS. If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs. The typical overall power savings of the OSPW System for OSPW System for SRAM eTap is 40%-60% over a stock setup. The oversized pulley wheels have lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15ml dropper bottle - Sticker Sheet
Specialized S-Works Standard Seatpost Collar
$16.00
- Aluminum collars feature angled slots. - S-Works 32.6mm standard collar (14mm tall) fits all Specialized road frames with an aluminum outer seat tube sleeve - S-Works 31.8mm standard collar (14mm tall) fits all Specialized road frames with a 31.8mm outer seat tube diameter
Specialized Mini Chain Guide
$33.00
This minimal ISCG 05 chain guide is designed to promote pedaling efficiency and low drivetrain drag while keeping the chain securely on the chainring through rough terrain.
ENVE SES Aero Handlebar Clip-on Extensions
$350.00
The SES Aero Clip-On bars integrate seamlessly into the SES Aero Road Bar to help riders achieve the most aerodynamic position possible on their road bikes. Combining the SES Aero Road Bar with Clip-Ons is an excellent solution for hilly time trials and triathlons where riding a road bike and saving weight offers the best chances for success. The Aero Clip-On Extensions are constructed from 100% uni-directional carbon fiber and cold forged aluminum. The clip-on bars share the same extensions as the SES Aero TT Bar and may be cut to three unique styles including J-bend, S-bend, and Straight. You can also run shifters at the end of the extensions, if desired. The carbon pad carriers allow for a smooth, vibration-damped ride with a reversible 8 hole pattern that allows perfect pad positioning. The pads are compression-molded neoprene and provide a comfortable arm rest and slip-free surface.
Shimano STEPS CITY E6000 Rear Carrier Battery
$569.99
- BT-E6000(battery) / SM-BNE60 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6000 features integrated sense of design with carrier
CeramicSpeed 17287 Bearing
$121.00
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 28mm - Width: 7mm