Skip to main content

Filter By:

700c, 27-Inch & 650c

Roval C38 Disc Wheelset
$1,200.00
Roadies all drool over carbon wheels, but the price tag often puts them out of reach. The new C 38 Disc wheels break down this barrier while bringing reliable, high performance carbon road wheels to the masses. With the C 38, we developed an all-new, lightweight, and durable carbon rim with the modern features that savvy riders demand, and then we paired it with trusty DT Swiss components, like DT 350 rear hub internals and Competition spokes, for a build that ticks all the boxes on your wish list. The new C 38s are the perfect depth (38mm), too, so they'll feel at home on everything from gravel bikes, to aero bikes, and everything in between. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval tubeless tape and tubeless valves - Front Hub: DT Swiss 350 Disc for Roval, 100x12mm, Center Lock - Front Spoke Pattern: Two-cross/Radial - Nipple Type: DT Swiss Pro Lock Brass hexagonal - Rear Hub: DT Swiss 350 Disc for Roval, 142x12mm, Center Lock, 11-speed - Rear Spoke Pattern: Two-cross/Two-cross - Rim Depth: 38mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 21mm internal, 26.6mm external - Spoke Count: 24 front, 24 rear - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1,560g
Zipp 303 Firecrest Tubeless Disc Brake 700c Front
$925.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
Roval CLX 40 Tubular Wheels
$1,000.00
Slice through the wind on Roval's Rapide CLX 40 Wheelset. They feature 40mm-tall aero carbon rims, and DT Swiss Revolution straight-pull spokes laced to sealed ceramic cartridge bearings Roval hubs. The rear hub is adorned with DT Swiss's renowned 240 star ratchet internals. The wide, carbon rim provides a round tire profile and greater lateral stiffness for precise handling. This feathery, 1240-gram wheelset spins up with ease so you can bolt out of corners and breeze up the climbs. With your favorite tubular tires, these wheels roll as smooth as silk.
Roval CLX 50 Front
$1,100.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in. When we set out to create the CLX 50, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, while taking some aero guidance from the CLX 64, if we were going to create what we like to call "the unicorn wheel." Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. After finding the optimized rim shape that supported our svelte weight requirements, we opted to lace the rims, via 16 DT Swiss Aerolite spokes, to our Aero Flange (AF) hub with the legendary CeramicSpeed bearings. And when it was time for final testing validation, we were left with a 50mm-deep, 1375-gram clincher wheelset that's not only 200 grams lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon Fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 607g
Roval CL 50 Disc Wheelset
$1,750.00
After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found, until the CL 50 Disc was developed, that is. We paired our quiver-killing CLX 50 Disc rim with DT Swiss Competition round spokes, our Aero Flange Disc hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Why disc you ask? With our disc-specific rims, you not only ditch the brake track, but you get a stronger, more impact-resistant rim. This comes at the hands of a disc-specific carbon layup that optimizes stiffness and keeps weight as close to its rim-brake brethren as possible. And all the while, you get incredible brake modulation and power in all conditions. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1515-gram clincher wheelset that's race-ready and wallet-friendly. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, Front quick-release, 12mm endcaps, Rear quick-release, 142x12 thru-axle endcaps - Front Hub: Roval AFD1, Center Lock, sealed cartridge bearings, quick-release or 12mm thru-axle end cap - Front Spoke Pattern: Two-cross/Radial (2:1) - Nipple Type: DT Swiss Pro LockBrass hexagonal - Rear Hub: Roval AFD2, Center Lock, sealed cartridge bearings, DT Swiss 350 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Rim Depth: 50mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Width: 20.7mm internal, 29.4mm external - Spoke Count: 21 front, 24 rear - Spoke Type: DT Swiss Competition Race T-head - Total Wheelset Weight: 1,515g
Zipp 303 Firecrest Tubeless Disc Brake 650B Front
$1,150.00
The definition of "road cycling" now includes gravel and dirt as well as pavement. At the same time, bikes are evolving to meet the fit requirements of smaller riders. Meeting these two distinct needs was the driving force behind the Zipp 303 Firecrest 650B Tubeless Disc-brake wheelset. The smaller rim size provides room within frames and forks for larger tires that deliver increased comfort, compliance, and cornering performance. With more tire between the rim and the ground, the overall wheel diameter, including the tire, is similar to a standard 700c wheel and road tire combination. Back on the pavement, the 650B is a better-fitting wheel for smaller athletes riding compatible frames. For too long, many smaller cyclists have trained and raced on standard 700c wheels, losing out on the advantages of a proper fitting wheel such as improved handling and the elimination of front wheel-toe overlap. At the center of the 303 650B Firecrest Tubeless is a versatile and durable hubset, the German-engineered ZR1 DB. - Zipp graphics and cosmetic identity that scream speed - Versatile 45mm rim profile for increased speed and better cornering, control and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - ZR1 DB hubset is engineered in Germany with better seal design for improved durability - Built with Sapim CX Sprint J-bend spokes - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Roval CLX 64 Rear Wheel
$1,400.00
When we set out to create a wheelset built purely for speed, we wanted to make it more than just fast. Not that being fast wasn't a priority, but we were tired of wheels that only performed well in a straight line. In the end, we developed the CLX 64, the fastest wheel that we've ever tested. Not only is it the fastest in the tunnel, but its prestige has been verified with Gold Medals in the men's road race, time trial, and team time trial at the 2016 UCI World Championships. One of the first questions we get about the CLX 64 is, "Why 64mm instead of 65mm?" To put it simply, it's because 64mm simply tested faster than 65mm. One millimeter, that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two years of development, 80 variations in rim design, and nearly 300 hours studying tire and frame interactions in the Win Tunnel, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that's nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds. Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel "slow" due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort. The rim is not the only component of the CLX 64 that contributes to its aero prowess though, in order to create the fastest wheels, we focused on the wheels as a system, not just a rim with "other parts," and our Aero Flange (AF) hubs play a significant role. Designed completely in the Win Tunnel, our AF hubs feature an incredibly small frontal aero, without sacrificing stiffness, making them aerodynamically efficient. Taking the advantage a step further, these wheels were developed to work in harmony with modern-width 24C tires. The 21mm internal rim width spreads the tire out, in this case to 26C, making it seamlessly meet the rim. Not only does this create a system with low aerodynamic drag, but one that has exceptionally low rolling resistance and inspiring grip in the corners. And to make sure we checked all of the feature boxes, we also made the rim tubeless-ready. To top off the multitude of performance features of the rim, we chose the highest quality build components to pair the CLX 64 with. Starting with DT Swiss Aerolite bladed spokes, which test faster than their round counterparts in the Win Tunnel, we hand-laced the 64 rim to our AF hubs that house CeramicSpeed's legendary bearings and DT 240 hub internals at the rear. Why hand-built? Machines make mistakes and mistakes aren't something we're ok with, so we have real people lace each wheel by hand. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Rim Depth: 64mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal, 29.9mm external - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 850g
Specialized Roval 321 Disc - Rim Brake Rear
$2,500.00
Making up about 50% of your total race time, the bike portion of a triathlon is where equipment choices can make the difference between first and fifth. And no other equipment choice will save you more time than a disc wheel. While traditionally-shaped disc wheels are faster than their spoked counterparts, the 321 disc turns conventional design on its head, creating the fastest wheel available. Disc wheels often fall into two categories—a completely flat shape, with structure coming from carbon fiber and a honeycomb-foam filling, or a spoked wheel that's been faired with a carbon fiber cover. In our quest to break traditions, the 321 uses a single layer of 1k carbon fiber on each side of the wheel, and it all comes together at the brake track bridge. This kind of carbon fiber is rarely used in bicycle components due to its high manufacturing cost, but it offers a bevy of performance benefits. This coveted carbon is much lighter than other layups, like 3k and 12k, and it can only be laid by the most skilled of carbon fiber craftsmen. It's complicated, but the payout is worth it, as it delivers a supple ride and one of the lightest disc wheels available. And in the real world, this means that it'll spin-up quickly and reduce fatigue over the long haul. Stiffness is often the “hot-topic” in the disc wheel world, but we think it’s an interesting conversation. It's long been thought that efficient power transfer and high stiffness are directly correlated, but through extensive field testing, we've determined that this isn't the case at all. In fact, our initial disc was so stiff that, under power, it wouldn't flex with the frame and this caused brake rub. This wrongly creates the perception of a flexy wheel, when really, the wheel is actually too stiff. In order to solve the brake rub problem, we first designed our optimal aero shape and then worked on our internal stiffness targets to fit within what we consider to be a desirable frame stiffness. And while light overall weight was a development priority, our focus was aerodynamics. Through hours of Computational Fluid Dynamics (CFD) and testing in the Win Tunnel, we developed a new-to-category shape that's optimized to work with a tire for on-bike airflow. What this translates to is an all-carbon disc wheel that, on the non-drive-side, has a shape that's as aerodynamic as our current understanding allows, and a drive-side shape that's as aerodynamic as the wheel-dish and derailleur clearance will allow for. To save every possible watt, we've also added CeramicSpeed bearings and DT Swiss 240 hub internals into our hub. Each 321 Disc wheel is also 2Bliss-Ready out of the box and comes with a padded wheel bag, quick-release, tubeless valve, and SwissStop Black Prince brake pads. Designed for the most uncompromising athletes in the world, with engineering to match, the 321 Disc is the world's most advanced disc wheel for your race against the clock. - Rim Type: Carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Carbon Fiber - Brake Track Height: 12mm - Rim Depth: Solid Disc - Rim Width: 19mm internal, 27.3mm external (at brake track) - Rear Hub: Roval Disc, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Assembly Method: Handmade - Extras: Roval padded wheel bag, Roval steel quick-release, Roval tubeless valve, SwissStop Black Prince brake pads, Roval valve pocket covers - Weight: 1000g
Roval CLX 32 Tubular Wheel
$1,100.00 - $1,400.00
The Roval CLX 32 Tubular wheels are some of the lightest carbon wheels ever made, but this doesn't come at the expense of fundamental performance. Instead, painstaking engineering and lab testing helped them achieve a 490-gram front and 665-gram rear wheel that's tough enough for cyclocross racing, yet light enough for the demands of a GC climber. The low inertia and ample stiffness help the wheel accelerate and change direction on a dime. We didn't skimp on aerodynamic benefits either, despite this wheel's low rim profile. The CLX 32 was engineered in CFD around a 26mm-wide tire shape, and honed in Roval's very own Win Tunnel, in order to be as aerodynamic as some rims almost twice its depth. Meanwhile, Roval aero hubs and CeramicSpeed bearings complete the fast-engaging ensemble. Truly, the CLX 32 ushers in a new era of lightweight performance road wheels.
Zipp 808 NSW Carbon Tubeless Rim Brake Rear
$1,950.00
Zipp's 808 NSW Tubeless rim-brake wheelset features a rim shape that aerodynamically integrates wider tubeless tires for a new era of high-performance road cycling at our deepest rim depth, 82mm. The 808 NSW Tubeless allows you to run tubeless or traditional clinchers. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. The 808 NSW Tubeless's 19mm internal rim width and corresponding outer rim shape are optimized for aerodynamic advantage with 25mm tires. - An all-out aero 82mm rim profile that's tubeless ready for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Industry-leading ShowStopper brake track: powerful and consistent braking, even in the wet - Cognition hub with Axial Clutch technology provides reduced drag when coasting - New graphics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Ships with QR end caps and quick release skewers
Zipp 454 NSW Carbon Clincher Disc-Brake Rear Wheel
$2,200.00
The 454 NSW Carbon Clincher Disc-brake delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels with the superior modulation and stopping power of disc brakes. The 454 NSW’s undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. Zipp engineers have optimized the biomimicry-derived 454 NSW for the ultimate in all conditions braking control—disc brakes. This marks the first NSW wheelset available for disc brakes, offering cyclists the greatest AeroBalance with the superior modulation and stopping power of disc brakes. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition Disc-brake hubset - Axial Clutch technology - ImPress graphics - HexFin ABLC dimple pattern - Carbon Clincher - AeroBalance - Handcrafted in the USA
Zipp 808 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,500.00
There’s nothing middle of the road about the 808 Firecrest. At 82mm deep, it’s all out aero. Thanks to refinements to Zipp’s revolutionary Firecrest rim shape to be tubeless compatible and optimized for wider tires, the 808 Firecrest Carbon Clincher Tubeless Disc brake is ideal for the new era of disc brake road riding and racing. Without the constraints of rim brake caliper compatibility or brake-track requirements, the Firecrest Carbon Clincher Tubeless Disc-brake wheels offer the increased stopping power and modulation of disc brakes and a whole lot more. To maximize the aero performance of the wheels, Zipp’s ABLC dimples extend all the way to the outer edge of the disc-specific rims. The wheels are also optimized for wider tires to meet the performance needs of modern riders in search of low rolling resistance and aero efficiency with high comfort. The deeper Firecrest Tubeless Disc brake has an internal width of 19mm and are aerodynamically optimized for 25mm wide tires. This design improves Firecrest’s ability to yield low aerodynamic drag and high crosswind stability, a combination called AeroBalance. Designed to be tubeless compatible, the wheels feature a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance even when ridden at lower tire pressures. Zipp’s low rolling resistance and high grip Tangente RT28 and RT25 Road Tubeless tires pair well with the Firecrest disc brake wheels. A new carbon fiber layup for the Indianapolis-made rims keeps weight low while maintaining the Firecrest Carbon Clincher’s proven durability. The robust 77D/177D hubset, paired with 24 Sapim CX-Sprint spokes front and rear, keeps the wheels stiff and responsive. To ensure compatibility with any bike, the versatile 77D/177D hubs come with swappable end caps to work with QR’s and thru-axles, including 12x100mm and 15x100mm front thru-axles as well as 12x142mm rear thru-axles. The 177D rear hub is also XDR driver body compatible for use with SRAM 10-42 cassettes. Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels, and 12x142 dropouts for rear wheels - Freehub body spacer – 11 to 10 speed - SRAM XDR driver body for 177D available separately
Zipp 454 NSW Carbon Tubeless Rim Brake Rear
$2,200.00
Zipp's ultimate all-around speed weapon is now tubeless ready. That means you get all of the aero advantages of the 454 NSW Tubeless rim-brake wheelset with the added benefit of increased cornering grip and compliance with reduced rolling resistance. The wheel's 19mm internal width is optimized for running wider tires at reduced air pressure. The 454 NSW's undulating 53/58mm-deep rim shape—our proprietary Sawtooth profile—takes design cues from nature for our highest performing wheel when it comes to aero efficiency and crosswind stability. A humpback whale's fast and graceful movements are aided by tubercles on its pectoral fins. These structures inspired Zipp advanced development engineers to, for the first time, systematically apply biomimicry to solve the complex challenge of designing a wheel, with the undulating Hyperfoil nodes that reduce both aerodynamic drag and side force. Combine that with tubeless compatibility, and you are set for the ultimate in Zipp performance. - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 53/58mm rim depth - 19mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure - Industry-leading ShowStopper brake track: powerful and consistent braking, even in the wet - Cognition hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch technology allows the freehub's ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs. - New Zipp graphics and cosmetic identity that screams speed, applied using Zipp's ImPress direct-print technology. - Ships with QR end caps and quick release skewers
Zipp 808 Firecrest Carbon Tubeless Rim Brake Front
$1,150.00
Zipp's 808 Firecrest Tubeless rim-brake wheels make you faster with an 82mm rim depth that's fast, stable in crosswinds, and now tubeless ready. That means you get all the aero benefits with having the ability to run lower tire pressure for increased cornering grip and compliance and reduced rolling resistance, without the risk of pinch flats. These wheels are infused with technologies developed in our Indianapolis advanced development lab—Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency, and Zipp's ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. At the center of the 808 Firecrest Tubeless rim-brake is a versatile and durable new hubset, the German-engineered ZR1. - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - ShowStopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions - Tubeless technology ensures secure performance even when ridden at lower tire pressures - New ZR1 hub is engineered in Germany with better seal design for improved durability - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps and quick release skewers
Zipp 808 NSW Carbon Tubeless Disc Brake Rear
$1,950.00
Zipp's 808 NSW Tubeless Disc-brake wheelset features a rim shape that aerodynamically integrates wider tubeless tires for high-performance road cycling at our deepest rim depth, 82mm. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. Also, you get the wider tire options and increased stopping power of disc brakes. The 808 NSW Tubeless Disc brake wheels are optimized for smoother pavement and are aerodynamically optimized for 25mm tires. By extending our patented ABLC Sawtooth dimples all the way to the rim's edge on each of the wheels, NSW disc brake rims deliver higher frequency wind vortex shedding for best-in-class crosswind stability. - An all-out aero 82mm rim profile that's tubeless ready for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Cognition DB hub with Axial Clutch technology provides reduced drag when coasting - New Zipp graphics and cosmetics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 808 Firecrest Track Tubular
$1,100.00 - $1,300.00
At just 1,805 grams, Zipp's 808 Firecrest Track Tubular wheelset is tuned for speed with an 82mm Firecrest rim shape for superior aerodynamics, stiffness and stability. Designed from the ground up for the rigors of track racing, the 808 Track uses Zipp's lightweight 333 hubset, laced with Sapim CX-Ray spokes for stiffness that satisfies even the strongest track racers. Confident lane stability and immediate acceleration comes from oversized hub bearings and axles, and aerodynamics are further increased by asymmetrical rear hub flanges and the proven air-smoothing characteristics of Zipp's dimpled rim technology.
ENVE SES 3.4 Clincher ENVE Carbon Wheelset
$3,000.00
What It Is A climbing wheel with an aero advantage designed to be ridden in the mountains. Who it's for Road cyclists who require maximum versatility for riding in mountainous terrain and variable weather conditions. Why we made it Since the introduction of the original SES 3.4, we’ve implemented new design concepts across the SES lineup that result in a faster wheel and improved ride experience. The SES 3.4 features road tubeless compatibility, 25mm tire optimization, molded carbon brake track technology, and optimized SES aero rim shaping to ensure maximum efficiencies for a shallow aero wheel. Equally at home in the mountains as in the valleys, the SES 3.4 is the most versatile Smart ENVE System aero wheel. Like all SES wheel models, the SES 3.4 features dissimilar rim shapes and geometries between the front and back wheels to maximize aerodynamic efficiency and rideability in variable wind and weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while rear rim is 42mm deep and therefore improves overall airflow. For riding in mountainous terrain where heavy braking is required, the SES 3.4 features a high-temperature-resistant resin system and ENVE's molded-in brake track technology to ensure rim integrity and precision braking when and where it is needed most.
ENVE SES 2.2 ENVE Carbon Hub Wheelset
$3,000.00
What It Is An SES featured climbing wheel featuring the latest in ENVE brake track technology. Who it's for Climbing specialists seeking a wheelset that inspires confidence regardless of terrain or weather conditions. Why we made it To give you every advantage when riding through mountainous terrain and unpredictable weather conditions. The Smart ENVE System 2.2 is the ultimate climbing wheel with aerodynamic properties that refine stability in the most extreme wind and weather conditions. As such, lightweight trumps drag reduction with the SES 2.2. The SES 2.2 underwent in-frame development in the Mercedes GP-Petronas wind tunnel in order to define the final shape of the rim. Unlike the other SES wheelsets, the SES 2.2 features the same rim geometry front to rear. In terms of tire fitment, the SES 2.2 is developed to be used with 25mm tires and the clincher version of the rims is tubeless compatible. Because the SES 2.2 is designed to be ridden through the mountains, it was important to improve the performance levels of our molded brake track texture technology. As such, the SES 2.2 is the first SES rim to feature our new molded-in brake track texture. This new brake track texture improves braking performance by as much as 30% over the previous brake track and performs as well in wet conditions as it does in dry. Each SES 2.2 wheelset includes 2 pair of our new black brake pads which have been specially formulated to improve braking power, modulation, and wet weather performance. The combination of the new brake track and black brake pad compound delivers the ultimate in rim brake technology.
ENVE SES 2.2 Chris King Wheelset
$3,000.00
What It Is An SES featured climbing wheel featuring the latest in ENVE brake track technology. Who it's for Climbing specialists seeking a wheelset that inspires confidence regardless of terrain or weather conditions. Why we made it To give you every advantage when riding through mountainous terrain and unpredictable weather conditions. The Smart ENVE System 2.2 is the ultimate climbing wheel with aerodynamic properties that refine stability in the most extreme wind and weather conditions. As such, lightweight trumps drag reduction with the SES 2.2. The SES 2.2 underwent in-frame development in the Mercedes GP-Petronas wind tunnel in order to define the final shape of the rim. Unlike the other SES wheelsets, the SES 2.2 features the same rim geometry front to rear. In terms of tire fitment, the SES 2.2 is developed to be used with 25mm tires and the clincher version of the rims is tubeless compatible. Because the SES 2.2 is designed to be ridden through the mountains, it was important to improve the performance levels of our molded brake track texture technology. As such, the SES 2.2 is the first SES rim to feature our new molded-in brake track texture. This new brake track texture improves braking performance by as much as 30% over the previous brake track and performs as well in wet conditions as it does in dry. Each SES 2.2 wheelset includes 2 pair of our new black brake pads which have been specially formulated to improve braking power, modulation, and wet weather performance. The combination of the new brake track and black brake pad compound delivers the ultimate in rim brake technology.
ENVE SES 3.4 Clincher Chris King Wheelset
$3,000.00
What It Is A climbing wheel with an aero advantage designed to be ridden in the mountains. Who it's for Road cyclists who require maximum versatility for riding in mountainous terrain and variable weather conditions. Why we made it Since the introduction of the original SES 3.4, we’ve implemented new design concepts across the SES lineup that result in a faster wheel and improved ride experience. The SES 3.4 features road tubeless compatibility, 25mm tire optimization, molded carbon brake track technology, and optimized SES aero rim shaping to ensure maximum efficiencies for a shallow aero wheel. Equally at home in the mountains as in the valleys, the SES 3.4 is the most versatile Smart ENVE System aero wheel. Like all SES wheel models, the SES 3.4 features dissimilar rim shapes and geometries between the front and back wheels to maximize aerodynamic efficiency and rideability in variable wind and weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while rear rim is 42mm deep and therefore improves overall airflow. For riding in mountainous terrain where heavy braking is required, the SES 3.4 features a high-temperature-resistant resin system and ENVE's molded-in brake track technology to ensure rim integrity and precision braking when and where it is needed most.
ENVE SES 4.5 AR Disc Tubular ENVE Alloy Wheelset
$2,550.00
What It Is The SES 4.5 AR Disc is an uncompromising aero wheel designed specifically for disc brake-equipped bikes and large volume 28 – 30mm road tires. Who it's for Cyclists looking for more speed, comfort, and traction on all road surfaces will find the SES 4.5 AR Disc a game-changer. Why we made it The introduction of road frames with disc brakes and increased tire clearance has allowed us to take an unconventional approach to wheel design. The result is a wheel that brings new levels of confidence and performance to the road cycling experience. Full Details Rebellious, unconventional, and pioneering are words that describe the one-of-its-kind SES 4.5 AR Disc. Conceptualized for the cobbles of Paris-Roubaix through our partnership with Team Dimension Data, the SES 4.5 AR Disc was developed to deliver top-shelf aero performance, stability, and comfort for virtually any road surface. Like all Smart ENVE System aero wheels, the front and rear rims are specifically designed for the airflow seen at the front and back of the bike. As such, the front rim is shallower and wider to maximize stability in crosswinds, while the rear is deeper and narrower to aid in drag reduction. In addition to dissimilar geometries, the SES 4.5 AR Disc features a disc brake-specific construction that saves weight, improves strength, and creates an unprecedented ride quality.
ENVE SES 7.8 Tubular ENVE Alloy Hub Wheelset
$2,550.00
What It Is The fastest carbon fiber Smart ENVE System aero wheel yet. Who It's For Experienced triathletes and road racers who prefer tubular tires and are seeking maximum aero performance and stability. Why We Made It We made the SES 7.8 to achieve two things: more speed and more stability. The SES 7.8 embodies the latest SES technologies and includes our newest molded-in brake track and tubeless clincher tire compatibility. The SES 7.8 is wider and specifically optimized to perform best when used with a modern aero frame and large, 25mm tires. Full Details When the race is against the wind and the clock the SES 7.8 is optimized for the task. By reducing the trade-offs between aerodynamics, stability, weight, and stiffness, the SES 7.8 carbon fiber aero wheel is the perfect tool for road racing and triathlon alike. The SES 7.8 features front- and rear-specific rim geometries. The front rim is 71mm deep and 29mm wide, while the rear rims is 80mm deep and 27.5mm wide. The dissimilar rim geometries improve the efficiency of the airflow in the system of bike frame and wheels. Because running 25mm tires is now standard, the SES 7.8 was designed with larger tires in mind. Additionally, frame manufacturers are now producing frames that have more clearance between wheel and frame which has opened up the design scope for a wheelset. The SES 7.8 is optimized for these frames. In addition to changes in shape and structure, the SES 7.8 features the latest molded-in carbon fiber brake track texture and is compatible with road tubeless tires.
ENVE SES 5.6 Disc Tubular Chris King Ceramic Wheelset
$3,200.00
What It Is The ultimate disc brake-specific, aerodynamic, lightweight road race wheelset. Who It's For The SES 5.6 Disc is optimized aerodynamically and structurally for disc use with tubular tires. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc's reduced drag, lightweight design, and rim shape optimized for larger-volume road tires. Why We Made It Most "disc brake" wheelsets are simply repurposed rim brake wheels with disc hubs. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface and manage high temperatures from braking, you can reduce the rim's weight, adjust shape for improved aerodynamics and provide better tubeless performance. Full Details Disc brake technology offers improved braking performance for amateur and professional road cyclists alike. Carbon fiber braking surfaces are a major design constraint that limits weight savings and rim design. By removing the constraints of a braking surface, we can completely rethink the shape of the rim. The SES 5.6 Disc features patented SES rim curvature, but has been further optimized for disc brakes. Additionally, the SES 5.6 Disc carbon fiber clinchers and tubulars are very lightweight, because the material used for rim brake heat management has been eliminated. This allows for a more structurally efficient and impact-resistant rim. Finally, the SES 5.6 Disc carbon clincher is road tubeless-compatible and can still be run with standard inner tubes and tires. Like the current generation SES carbon clinchers and tubulars, the 5.6 Disc has been aerodynamically optimized around 25mm tires.
ENVE SES 7.8 Clincher ENVE Carbon Hub Wheelset
$3,000.00
What It Is The fastest carbon fiber Smart ENVE System aero wheel yet. Who It's For Experienced triathletes and road racers seeking maximum aero performance and stability. Why We Made It We made the SES 7.8 to achieve two things: more speed and more stability. The SES 7.8 embodies the latest SES technologies and includes our newest molded-in brake track and tubeless clincher tire compatibility. The SES 7.8 is wider and specifically optimized to perform best when used with a modern aero frame and large, 25mm tires. Full Details When the race is against the wind and the clock the SES 7.8 is optimized for the task. By reducing the trade-offs between aerodynamics, stability, weight, and stiffness, the SES 7.8 carbon fiber aero wheel is the perfect tool for road racing and triathlon alike. The SES 7.8 features front- and rear-specific rim geometries. The front rim is 71mm deep and 29mm wide, while the rear rims is 80mm deep and 27.5mm wide. The dissimilar rim geometries improve the efficiency of the airflow in the system of bike frame and wheels. Because running 25mm tires is now standard, the SES 7.8 was designed with larger tires in mind. Additionally, frame manufacturers are now producing frames that have more clearance between wheel and frame which has opened up the design scope for a wheelset. The SES 7.8 is optimized for these frames. In addition to changes in shape and structure, the SES 7.8 features the latest molded-in carbon fiber brake track texture and is compatible with road tubeless tires.
ENVE SES 5.6 Disc Tubular ENVE Alloy Hub Wheelset
$2,550.00
What It Is The ultimate disc brake-specific, aerodynamic, lightweight road race wheelset. Who It's For The SES 5.6 Disc is optimized aerodynamically and structurally for disc use with tubular tires. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc's reduced drag, lightweight design, and rim shape optimized for larger-volume road tires. Why We Made It Most "disc brake" wheelsets are simply repurposed rim brake wheels with disc hubs. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface and manage high temperatures from braking, you can reduce the rim's weight, adjust shape for improved aerodynamics and provide better tubeless performance. Full Details Disc brake technology offers improved braking performance for amateur and professional road cyclists alike. Carbon fiber braking surfaces are a major design constraint that limits weight savings and rim design. By removing the constraints of a braking surface, we can completely rethink the shape of the rim. The SES 5.6 Disc features patented SES rim curvature, but has been further optimized for disc brakes. Additionally, the SES 5.6 Disc carbon fiber clinchers and tubulars are very lightweight, because the material used for rim brake heat management has been eliminated. This allows for a more structurally efficient and impact-resistant rim. Finally, the SES 5.6 Disc carbon clincher is road tubeless-compatible and can still be run with standard inner tubes and tires. Like the current generation SES carbon clinchers and tubulars, the 5.6 Disc has been aerodynamically optimized around 25mm tires.
ENVE SES 4.5 Clincher ENVE Carbon Hub Wheelset
$3,000.00
What It Is The ultimate everyday carbon fiber cycling wheelset and choice of Team Dimension Data. Who it's for Road cyclists and triathletes looking to minimize the trade-off between aerodynamics, lightweight, and stability. Why we made it Because from the moment the first prototypes made the rounds at ENVE, it's been the house favorite. The SES 4.5 rounds out the Smart ENVE System wheel line as a true mid-depth everyday cycling race wheelset. Additionally, the SES 4.5 features a refined shape and construction that yields better acceleration, cornering, impact resistance, and weight savings.
ENVE SES 4.5 AR Disc Clincher Chris King Wheelset
$3,000.00
What It Is The SES 4.5 AR Disc is an uncompromising aero wheel designed specifically for disc brake-equipped bikes and large volume 28 – 30mm road tires. Who it's for Cyclists looking for more speed, comfort, and traction on all road surfaces will find the SES 4.5 AR Disc a game-changer. Why we made it The introduction of road frames with disc brakes and increased tire clearance has allowed us to take an unconventional approach to wheel design. The result is a wheel that brings new levels of confidence and performance to the road cycling experience. Full Details Rebellious, unconventional, and pioneering are words that describe the one-of-its-kind SES 4.5 AR Disc. Conceptualized for the cobbles of Paris-Roubaix through our partnership with Team Dimension Data, the SES 4.5 AR Disc was developed to deliver top-shelf aero performance, stability, and comfort for virtually any road surface. The SES 4.5 AR Disc borrows from ENVE's M Series carbon mountain wheel tubeless technology and features hookless beads. Hookless beads improve aerodynamic performance by aiding airflow from tire to rim as well as allow for the best tubeless tire performance possible. Like all Smart ENVE System aero wheels, the front and rear rims are specifically designed for the airflow seen at the front and back of the bike. As such, the front rim is shallower and wider to maximize stability in crosswinds, while the rear is deeper and narrower to aid in drag reduction. In addition to dissimilar geometries, the SES 4.5 AR Disc features a disc brake-specific construction that saves weight, improves strength, and creates an unprecedented ride quality.
ENVE SES 3.4 Tubular Chris King Wheelset
$3,000.00
What It Is A tubular climbing wheel with an aero advantage designed to be ridden in the mountains. Who it's for Road cyclists who prefer tubular tires, yet require maximum versatility for riding in mountainous terrain and variable weather conditions. Why we made it Since the introduction of the original SES 3.4, we’ve implemented new design concepts across the SES lineup that result in a faster wheel and improved ride experience. The SES 3.4 features 25mm tire optimization, molded carbon brake track technology, and optimized SES aero rim shaping to ensure maximum efficiencies for a shallow aero wheel. Equally at home in the mountains as in the valleys, the SES 3.4 is the most versatile Smart ENVE System aero wheel. Like all SES wheel models, the SES 3.4 features dissimilar rim shapes and geometries between the front and back wheels to maximize aerodynamic efficiency and rideability in variable wind and weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while rear rim is 42mm deep and therefore improves overall airflow. For riding in mountainous terrain where heavy braking is required, the SES 3.4 features a high-temperature-resistant resin system and ENVE's molded-in brake track technology to ensure rim integrity and precision braking when and where it is needed most.
ENVE SES 5.6 Disc Clincher Chris King Wheelset
$3,000.00
What It Is The ultimate disc brake-specific, aerodynamic, lightweight road race wheelset. Who It's For The SES 5.6 Disc is optimized aerodynamically and structurally for disc use. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc's reduced drag, lightweight design, and rim shape optimized for larger-volume road tires. Why We Made It Most "disc brake" wheelsets are simply repurposed rim brake wheels with disc hubs. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface and manage high temperatures from braking, you can reduce the rim's weight, adjust shape for improved aerodynamics and provide better tubeless performance. Full Details Disc brake technology offers improved braking performance for amateur and professional road cyclists alike. Carbon fiber braking surfaces are a major design constraint that limits weight savings and rim design. By removing the constraints of a braking surface, we can completely rethink the shape of the rim. The SES 5.6 Disc features patented SES rim curvature, but has been further optimized for disc brakes. Additionally, the SES 5.6 Disc carbon fiber clinchers and tubulars are very lightweight, because the material used for rim brake heat management has been eliminated. This allows for a more structurally efficient and impact-resistant rim. Finally, the SES 5.6 Disc carbon clincher is road tubeless-compatible and can still be run with standard inner tubes and tires. Like the current generation SES carbon clinchers and tubulars, the 5.6 Disc has been aerodynamically optimized around 25mm tires.
ENVE SES 7.8 Tubular Chris King Wheelset
$3,000.00
What It Is The fastest carbon fiber Smart ENVE System aero wheel yet. Who It's For Experienced triathletes and road racers who prefer tubular tires and are seeking maximum aero performance and stability. Why We Made It We made the SES 7.8 to achieve two things: more speed and more stability. The SES 7.8 embodies the latest SES technologies and includes our newest molded-in brake track and tubeless clincher tire compatibility. The SES 7.8 is wider and specifically optimized to perform best when used with a modern aero frame and large, 25mm tires. Full Details When the race is against the wind and the clock the SES 7.8 is optimized for the task. By reducing the trade-offs between aerodynamics, stability, weight, and stiffness, the SES 7.8 carbon fiber aero wheel is the perfect tool for road racing and triathlon alike. The SES 7.8 features front- and rear-specific rim geometries. The front rim is 71mm deep and 29mm wide, while the rear rims is 80mm deep and 27.5mm wide. The dissimilar rim geometries improve the efficiency of the airflow in the system of bike frame and wheels. Because running 25mm tires is now standard, the SES 7.8 was designed with larger tires in mind. Additionally, frame manufacturers are now producing frames that have more clearance between wheel and frame which has opened up the design scope for a wheelset. The SES 7.8 is optimized for these frames. In addition to changes in shape and structure, the SES 7.8 features the latest molded-in carbon fiber brake track texture and is compatible with road tubeless tires.
Page 1 of 7 Next page