Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

Maxima Chain Pro Dry Formula Lube
$9.95
- Ultra-Clean, waterproof formula chain lube designed for use in dry conditions - Surface active chemistry promotes smooth shifting under load, quiets chain noise and significantly improves life of drivetrain - Fast penetration and setup promotes a clean, trouble-free operating environment in dry, dusty conditions
Zipp Tangente Tube Wrench
$7.00
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Syncros iS Cache Tool 8CT Multi-tool
$34.99
This slim multi-tool has 8 functions plus a chain tool for those unfortunate occurrences that happen from time to time. Features steel side plates for higher strength and 8 machined and treated bits. This tidy package is perfect for the new Scott Spark. - T30/T25/Hex8/Hex5/Hex4/PH2/Chain tool/Chain link holder
Syncros Composite 14CT Multi-Tool
$24.99
The Composite 14CT provides you with fourteen trailside essentials plus a forged chain tool to get you out of most any mechanical mess. - Material: Steel bits, fiberglass-reinforced injected casing - Weight: 152 grams - Wrapped bits - Dimensions: 76 x 49 x 23mm Included tools: - Hex 2/3/4/5/6/8 - Torx T25 - Screwdriver PH1/FLAT - Spoke wrench 14/15/16G/M7 - Chain tool
Syncros Matchbox 9 Multi-Tool
$22.99
The Matchbox 9 includes nine essential trailside tools in a compact and very lightweight design to help you remedy most mechanicals and get you back on your bike. - Forged and machined 45mm bits - Optimized to reach tight areas - Bits protected by silicone sleeve
Phil Wood Waterproof Grease
$13.00
- Prevents rust, repels water - Extra heavy duty, nothing finer - Has achieved the Premium lubricant classification by all major bearing manufacturers worldwide
CeramicSpeed UFO Chain Lube
$45.00
UFO chain lubricant hardens to a 100% dry coating to protect against unwanted contaminants, which results in a quieter drivetrain, reduced friction and component wear. - Tested in real-world conditions to quantitatively create the most efficient mode of chain lubrication to date - The improved performance and reduced friction can save up to 5 watts for increased efficiency - *Bottle, chain and air temperature should be at or above 68F for proper application and performance - *Additional instructions and recommended application steps are included in box - 300 km per coating - More than 35 coatings per bottle - Non toxic, non-flammable, bio-degradable formula - Increased temperature stability - apply between 5-35OC / 41-95OF
Park Tool Heavy-Duty Tire Levers
Park's Heavy-Duty Tire Levers handle the toughest tire-and-rim combinations including difficult downhill and freestyle tires. Their specially designed tips engage the tire bead so it can be removed with just two levers. Plus, these beefy, forged-steel levers are a full 8-inches long for superior leverage.
Tri-Flow Superior Lube
$7.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Shimano TL-EW02 Di2 E-Tube Wiring Plug Tool
$5.00
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
Shimano TL-EW300 Di2 Cable Tool
$5.00
TL-EW300 Di2 Cable Tool
CeramicSpeed UFO Clean Drivetrain
$30.00
The CeramicSpeed UFO Clean Drivetrain thoroughly removes grease and grime from all drivetrain components. The unique properties dissolve wax from internal rollers and all surfaces of chain links. UFO Clean Drivetrain is designed and formulated to clean and prepare chains for wax coatings, using the same formula that we at CeramicSpeed use to prepare our UFO Chains. This is a non-toxic and biodegradable formula—environmentally friendly and safe. - Non-toxic and biodegradable formula - Thoroughly removes grease and grime from all drivetrain components - Developed and bottled in Denmark - Avoid applying directly to disc brake pads - Contains 1 liter - Not to be used as a bearing cleaner - Safe for carbon, glossy- or matte-painted, and anodized surfaces
Finish Line Fiber Grip Assembly Gel
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Silca Super Secret Chain Lube
$55.00
SILCA Super Secret Chain lube started out as a project to develop the fastest hot-melt wax lubricant available more than a year ago. Josh has been recommending Hot Melt Wax and helping Pro cyclists and triathletes wax chains for years and wanted to bring his lubricant formula to our customers, the challenge was how to consistently melt, dip and agitate the chain across different crockpot designs and temperatures.  The project took a fascinating turn from the world of IndyCar when Josh was introduced to a group that had developed a technology to put micro-scale wax powders into a solution that was quick-drying and forms a coating that is indiscernible from hot melt dipping. The combination of air-drying liquid wax and Tungsten Disulfide would quickly prove to beat all currently available hot-melt waxes in friction testing while being much faster and easier to apply. Best of all perhaps is that this formula would prove to be very environmentally friendly, utilizing 4 different types of wax, nanoplatelets of WS2 (Tungsten Disulfide), and mild alcohol to act as a carrier. This same alcohol is used in the SILCA Gear Wipes, making them a perfect product to clean and remove Secret Chain Lube. - 4 oz. and 8 oz. bottles with the precision applicator tip for dripping on your chain, or 12oz lube (leaving room for your chain) for dipping the chain - The chain should be VERY clean and dry before applying - Apply according to video and let dry for AT LEAST 12 hours for optimal results, 24 hours if applied in cool or humid weather conditions! We recommend applying the lube AFTER your ride so it's ready for next time! - NOTE: Over time the WS2 will begin to settle to the bottom of the bottle, shake well before using!
Sunlite Round Spoke Wrench (Taiwan)
$9.99
• Precision-sized, hardened-steel, chrome-plated spoke wrench • Deep U-channels for a great grip • 8-groove design fits 9/10/11/12/13/14/15 gauge spokes/nipples • Made in Taiwan
Specialized Replacement EMT Chain Tool/Head (Mini/Race)
$7.00
Replacement Chain Tool for EMT tools.
Syncros iS Coupe Cage
$39.99
Our iS (Integrated Storage) solution for road and gravel riders, the iS Coupe cage is a top entry cage which can be mounted anywhere on the bike. The 10 function multi-tool is securely housed behind the bottle and features a special finish for higher resistance to corrosion. The tool itself has 10 function to help you get over basic trail side disasters. - Integrated storage top-entry cage - Upgraded bit finish for higher resistance to corrosion - 10 function multi-tool - Low-profile design mounts seamlessly to the downtube or seat tube - Glass Fiber reinforced Nylon - Hardened steel bits - Hex2/2.5/3/4/5/PH2/FLAT/T10/20/25 - 2 bit adaptors : Hex 8mm / T30 - 98g approximate weight
Syncros Matchbox SL-CT Multi-Tool
$29.99
The Matchbox SL-CT is the 'Swiss Army Knife' of light weight trail-side tools. It provides you with eight trail-side essentials plus a forged chain tool in a lightweight design to get you out of most any mechanical mess. - Forged and machined 45mm bits, enable to reach smallest areas - Dimensions 63 x 51 x 13mm - Foldable chain tool 9/10/11S compatible - Hex 2/2.5/3/4/5 - Torx T25 - Screwdriver PH2 - Chain tool - Steel chrome plated bits - Glass fiber reinforced injected casing - Weight: 94g - Dimensions: 63 x 51 x 13cm
Black Ops DefendR 8-Key Freewheel Remover
$27.99
- For use on 8-key single speed freewheels - Tool Type: Freewheel Remover - Compatibility: 16-22T smallest cog (Gray) - Compatibility: 13-14T smallest cog (Silver)
White Lightning Wet Ride
$8.99 - $11.99
Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.
Park Tool Magnetic Parts Bowl
The Magnetic Parts Bowl is the ideal solution for keeping track of small metal parts. It's 6 inches in diameter and featues an extra-strong magnet so bearings, cones and springs stay put and you don't lose them.
Park Tool Replacement Clamp Covers
$9.14 - $25.08
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
Pedro's Cone Wrench II
$15.00
- Updated shape features smaller head profile for clearance and longer handle for control. - Superior material and heat treatment outlast the competition. - Precision laser cut design with ergonomic cushioned grip. Pedro's cone wrenches are made from 2mm thick, precision laser cut, heat-treated tool steel and are revered for outlasting many other "shop quality" cones wrenches. Pedro's designed each cone wrench to fit perfectly, protecting the hub and ensuring simple and safe usage for the mechanic. Each flat wrench also features a single-ended design with ergonomic cushioned grip to provide maximum leverage & comfort. The updated shape features a smaller head profile for better clearance and a longer handle for improved leverage and control. Backed by Pedro's lifetime warranty.
Jagwire Elite Mineral Oil Bleed Kit
Elite Bleed Kits feature premium syringes and components designed for the professional mechanic. - Premium syringes offer enhanced clarity, improved durability, and ergonomic handles - Innovative quarter-turn valves make it easy to quickly open and close the bleed system - Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician - Includes bleed blocks for most popular 2-piston and 4-piston brake calipers - Includes adapter fittings for compatibility with Shimano, Magura, Tektro, TRP, and Hayes disc brakes - Deluxe case keeps small parts organized and protected - Red seals provide easy identification for use with mineral oil systems only
Finish Line Showroom Polish & Protectant
$24.99 - $62.99
Finish Line Showroom Polish is made with Teflon fluoropolymer and uses DuPont Teflon Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle. 100% safe for all plastics, rubbers and carbon fiber parts.
Park Tool Bottom Bracket Wrench (External Bearing)
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
Park Tool Utility Pick Set
Park Tool's Utility Pick Set is a set of three unique, multi-purpose picks ideal for a wide variety of detail work. Features: • Aluminum handle with magnet • Picks are replaceable, cold formed, heat treated and polished high carbon steel • Set includes 1-straight, 1-hook and 1-90 degree pick
SRAM DOT 5.1 Hydraulic Brake Fluid
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes
Pedro's Hex Driver II
$18.49
- New extra-long 27cm hex key and second ball-end deliver leverage and speed - Specifically designed for quick and easy installation and removal of pedals and cranks - Ergonomic dual-density screw driver handle - Designed to stand up to the harsh conditions of professional use Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal. Features include an ergonomic dual-density screw driver handle for comfort and control, a new extra-long 27cm hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Backed by Pedro's lifetime warranty.
Pedro's Fixed Torque Driver
$44.99
Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits
Page 1 of 6 Next page