Seatposts

The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing

The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel

Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Seatpost the lightest post we've ever seen that passes our standards. At 136 grams (27.2mm x 300mm), it's about as light as you'll find. Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist 2-bolt micro-adjust clamp with extended saddle cradle ensures precision fit and secure retention. Available in two sizes, 27.2mm x 300mm and 27.2mm x 360mm, each with a 12mm setback. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - 136 grams (27.2mm x 300mm), - 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - Advanced composite construction delivers light weight and reliability. - Available in two sizes: 27.2mm x 300mm x 12mm offset, 27.2mm x 380mm x 12mm offset - No-Fault crash replacement policy. Lifetime warranty - System Weight Limit: 275lbs / 125kg

3D forged one-piece AL6061-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified

The Pure Cycles seatpost is a no frills no nonsense seatpost perfect for a basic replacement.

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm

This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside.

- LEV INTEGRA'S internally routed cable significantly cleans up the look of your bike. - With shifter cables, brake lines and lock out cables clamped and zip tied to your carbon fiber piece of art, mountain bike frames have begun to look like an IT guy's fantasy. - Clear the clutter while benefiting from legendary LEV technology – now available in 175mm travel.

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

• Forged aluminum • Integrated micro-adjust seat clamp

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm

This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options. - FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6. - Engineered to have the saddle move in a perfect arc, aka a back & downward motion. - Setback: 20mm/0mm - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Length: 380mm/450mm - Approximate Weight: 209g

The Terra seatpost is the best choice for riding mixed terrain, gravel, or rough roads because it smooths the ride by allowing significant vertical compliance. The secret to this ride smoothing post is in the composite layup that we utilized. By utilizing composites with varying elongation characteristics at specific locations in the post, we enabled vertical compliance for comfort while retaining requisite strength for mixed terrain riding, all at a sub-200 gram weight (27.2 x 330 x 0). - 18mm Vertical Compliance (20mm offset / Full Extension) - 194 grams (27.2 x 330mm x 0) - Advanced composite construction delivers ride-smoothing vertical compliance. - Available in four sizes: 27.2mm x 330mm x 0 offset, 27.2mm x 380mm x 0 offset, 27.2mm x 330mm x 20mm offset, 27.2mm x 380mm x 20mm offset - No-Fault crash replacement policy. Lifetime warranty - Proven clamp design ensures ease of adjustment and slip-free performance. - System Weight Limit: 275lbs / 125kg

This replacement seatpost for the Tarmac SL8 ensures the perfect fit with two different setback options—0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2024 Tarmac SL8. - Setback: 0/20mm. - 20mm offset: 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - 0mm offset: Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

Zipp's Service Course Seatpost is stiff, light, has excellent gripping power, and the low-profile clamp allows you to slide the saddle extra far back on the rails. The shaft and head are 3D forged from a single piece of light, tough 7075 aluminum, and the clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.

ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

Since the introduction of Zipp's line of Service Course SL components, they've had amazing success with pro-level athletes in all disciplines. While the successes have been coming, they've also drawn from riders' feedback. Zipp not only learned how and why athletes make their equipment choices, but how manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, they're proud to introduce a completely redesigned Service Course SL seatpost with a carbon tube and aluminum head for better shock absorption and weight savings. - Lightweight clamping system - Updated carbon tube material

• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams

Finding your rhythm can make or break your race. Our Control SL seat post puts you in an ideal position for high-output efforts and is easily adjusted thanks to the 2-bolt system letting you easily make micro-alignments for that dialed attack position—all while remaining feather light at 180g for XC riding and racing. Its 30.9mm post diameter and 415mm length make the Control SL seat post a perfect match for the modern XC bike. Once your riding position is set, you’re focus is dialed on ride fast and efficiently —not your seat post. - Material: High-modulus carbon fiber - Length: 415mm - Offset: 0mm - Post Diameter: 30.9mm - Seat Clamp: 2-bolt Micro Adjust with 46mm saddle rail cradle, Compatible with carbon and alloy saddle rails - Bolts: Titanium - Weight: 180g - System Weight Limit: 275lbs / 125kg

- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish

Zipp's SL Speed Seatpost has become a favorite of pro road and cyclocross racers because of its light weight and dependability. - Titanium hardware; black, red and white nut retainers included - Minimum insertion length is 100mm - Dual-bolt, low-profile micro-adjust cradle - UD carbon post, head, and clamps