Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Pro LT Stem
$39.99
the Pro LT stem is constructed of strong and lightweight anodized 6061 alloy, and features a headlock system for a secure front clamp fixation.
Syncros Creston iC SL X
$699.99
Designed for gravel, the Syncros Creston iC SL X is the ultimate in integration with a flare designed to give maximum options offroad. Clean and uncluttered, our Syncros combo cockpit allows us to route all the cables completely internally through the bar, through the headset, and into the frame. - Developed for the SCOTT Addict Gravel - Integrated cables for both mechanical and electronic groupsets - iC integrated cockpit - Gravel-specific geometry with super-compact drops and short reach - 60mm/115mm/16° (Reach/Drop/Flare) - Full carbon construction, Superlight layup - Weight: 315g
Pro PLT Stem
$59.99
- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation
Fizik Cyrano R1 Stem
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
TruVativ Descendant 35mm Stem
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Syncros XR1.5 -8° Stem
$64.99
XR1.5 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. - Designed for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt - Lengths: 50-90mm - Angle: -8°
Syncros RR 1.5 Stem
$159.99
The RR 1.5 stem offers the rider or mechanic the ability to change the stem without cutting the disc brake cables while simultaneously offering a fully integrated cable setup. A removable top allows for easy access while a magnetic stem cap cover completes the minimalist look. KEY FEATURES - Fully integrated cables - Lightweight Alloy construction - Change stem without cutting cables - Model 275431
Syncros Creston iC SL Bar/Stem
$699.99
The Syncros Creston iC is the ultimate in terms of integration on the road. Clean and uncluttered our new Syncros combo cockpit allows us to route all the cables completely internally through the bar, headset and into the frame as part of SCOTT’s new ICC routing. - Carbon UD, Superlight Layup - Compact Bend 75mm/125mm Reach/Drop - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/4" for Scott Addict RC MY20 - Weight: 280g
Syncros Fraser iC SL WC, 740mm, -20°
$399.99
The bar of choice of Kate Courtney of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint the desired reach, drop, and sweep for Kate, allowing her to reach her optimal position to race at the highest level at the World Cup. This -20 degreee stem angle might not be for everyone but works for her. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Syncros Fraser iC SL WC, 740mm, -40°
$399.99
The bar of choice of Nino Schurter and Lars Forster of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint ideal reach, drop, and sweep for Nino and Lars, allowing them to get a super-low and fast position matched perfectly to what they need to race at the highest level at the World Cup. This -40 degreee stem angle might not be for everyone but works for them. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Syncros Fraser iC SL DC, 760mm
$399.99
The DC Fraser features our integrated bar and stem concept, which now also allows for the integration of cables on the front of the bike. The ultralight result is optimized here for DC or Down-Country riding with a range of stem lengths to suit every shape and size of rider. Our DC Frasers have a neutral stack height across the range of stem lengths. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Syncros Fraser iC SL XC, 740mm
$399.99
The XC Fraser features our integrated bar and stem concept, which now also allows for the integration of cables on the front of the bike. The ultralight result is optimized here for XC racing with a range of stem lengths to suit every shape and size of rider. Our XC Frasers are sized so that the stack height remains the same on the bike no matter the stem length. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Zipp Service Course Stem
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
Specialized S-Works Tarmac SL7 Stem
$125.00
Lean and clean. The lightweight and stiff S-Works Tarmac Stem features integrated cable routing for Tarmac SL7 models to clean up the cockpit without complicating the bike build. - Compatible with Tarmac integrated cockpit. - Integrated face-plate computer mount. - 80-140mm length options. - 6 and 12 degree rise options. - Approx. weight: 155g (100mm)
Pure Cycles Threadless 1-1/8-inch Stem
$24.39
A no-muss, no-fuss, four-bolt stem perfect for any threadless 1-1/8" steerer. Available with 25.4mm clamps, so whatever your dream bars, you can make 'em fit. - Choose between 80mm or 90mm reach (90mm is standard on our Original Series) - +-7 degrees - Threadless 1-18"
Zipp SL Speed Stem
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
Syncros DH 1.5 Stem
$69.99
Redesigned for the modern rider, our new stem is constructed for a 31.8mm diameter bar with a new lower stack height to reflect the move toward bigger wheels.
Syncros Fraser iC SL Special Edition Handlebar
$499.99
Ridden by the best, our Fraser edition is designed according to the preferred geometry of the World and Olympic Champion. The stem has a minus 25-degree rise and our T-bar geometry with the weight savings that come from producing the bar and stem in one piece. This is a limited edition of the Fraser iC SL. - XC World Cup level carbon bar - One piece construction - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -25° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm
Specialized S-Works SL Stem w/Expander Plug
$124.99
Specialized's S-Works SL Stem is sleek and lightweight. - 3D-forged and CNC-machined, 7075 aluminum road stem . - Includes expander plug for carbon steerer tubes and titanium hardware.
Zipp Service Course Stem
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
ENVE Composites Aero Road Stem
$299.99
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
ENVE Composites M6 Stem
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Bar Clamp Diameter (mm): 31.8 mm - Material: Carbon - S.H.I.S. Stem Clamp Diameter: 28.6 - Stem angle: 0-degree
Zipp SL Sprint Stem
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
ENVE Composites M6 Mountain Stem 31.8mm
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 31.8mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (40mm), 92g (55mm), 99g (70mm), 104g (85mm)
ENVE Composites Alloy Mountain Stem
$160.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications. - Blind bolt holes and shaping - Cold-forged and precision-machined - No-gap face plate and clamp area - Stainless hardware
Roval Alpinist Cockpit
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Cockpit the lightest one-piece bar/stem combo that passes our standards; at 255 grams (110 mm x 420mm). Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist Cockpit's round tube shape and tradition bend respect tried and true forms, but the optimized composite layup and internal cable routing are decidedly modern. Available in 10 sizes, there's one that will fit you perfectly. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - Bend: Tradition radius ( 125mm Drop / 75mm Reach) - Clamp Diameter: 31.8 - Compatibility: Shimano, SRAM, Campagnolo; Di2 and EPS - Material: Advanced carbon composite - Sizes: 400 mm x 80/90/100mm; 420mm x 90/100/110/120mm; 440mm x 110/120/130mm - Stem Angle (Rise): 6-Degrees - System Weight Limit: 275lbs / 125kg - Weight: 255 grams (110 mm x 420 mm)
Syncros Fraser iC SL WC, 740mm, -30°
$399.99
The bar of choice of Andri Frischknecht of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint ideal reach, drop, and sweep for Andri, allowing him to reach his optimal position to race at the highest level at the World Cup. This -30 degreee stem angle might not be for everyone but works for him. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Dimension Trail Stem 31.8
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
TruVativ Holzfeller Stem
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
Syncros Fraser iC SL SE Bar/Stem
$499.99
A variant of our Fraser iC SL Special Edition, this version has a less extreme stem angle as preferred by Andri Frischnecht of the Scott-SRAM team. The stem has a minus 17 degree rise, 740mm width and our T-bar geometry with the weight savings and stiffness benefits that come from producing the bar and stem in one piece. This is a limited edition of the Fraser iC SL. - XC World Cup level carbon bar - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem: -17° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm - Steerer Diameter: 1-1/8" - Clamp Diameter: iC (integrated Cockpit) - Carbon UD, Superlight Layup
Page 1 of 2 Next page