Filter By:
Parts & Accessories

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$9.99
Camera mount for Jackal and Impala helmets.
- COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala
- ATTACHMENT: Velcro
- WEIGHT: 13g
- MATERIAL: Nylon

$14.99
Visor for Impala helmet
COMPATIBILITY
- Impala MIPS
- Impala
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$10.00
- Replacement X-Static pads for Lazer's Wasp Air Helmet
- X-Static pads are an anti-microbial, self-cleaning pad system

$24.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
This optional taillight can be added to certain models of Lazer helmets and provides additional visibility on the helmet. It fits inside dock within the Century MIPS or Century helmet, or mounts to the Mudcap when used with the Z1 MIPS, Z1, Blade+ MIPS or Blade+ helmets. Note, the Z1 LED Mudcap (PLZ2005660134) or Blade Mudcap (PLZ2167882106) must be used with the corresponding helmet in order to mount this light. No Mudcap is required with the Century series helmets.
COMPATIBILITY
- Century MIPS
- Century
- Z1 MIPS
- Z1
- Blade+ MIPS
- Blade+
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 1.5 hours
- RUN TIME: 27 hours
- LUMENS: 4 lumens
- ATTACHMENT: Century helmet
- WEIGHT: 11g
- MATERIAL: LED light

$6.99
Freshen up the interior of your helmet with a new pad set!
- Replacement pads for Jackal helmets

$20.00
This is a replacement for the ANGi-ready Mindset Hairport II system found on S-Works Evade helmets.
- Replacement ANGi-ready fit system.

$17.00
This is a replacement for the ANGi-ready Hairport FSL II fit system found on Propero III helmets.

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad.
- COMPATIBILITY: Cameleon MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$14.99
Visor for Coyote helmet
COMPATIBILITY
- Coyote MIPS
- Coyote
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$35.00
Strap dividers for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- MATERIAL: Nylon

$34.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap.
COMPATIBILITY
- Cityzen KinetiCore
- Jackal KinetiCore
- Nutz KinetiCore
- Pnut KinetiCore
- Strada KinetiCore
- Vento KinetiCore
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2.5 hours
- RUN TIME: 54 hours
- LUMENS: 40 lumens
- ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet.
- WEIGHT: 15g

$20.00
This is a replacement for the ANGi-ready Mindset Hairport system found on S-Works TT helmets.

$17.00
This is a replacement of the ANGi-ready Hairport FSL II fit system found on Echelon II helmets.
- Replacement ANGi-ready fit system.

$39.99
Magnetic mount lens for Lazer Bullet 2.0 helmet.
The integrated lens is an integral part of the Bullet 2.0 helmet. It can be stored on the helmet surface using the magnetic docking when not in use.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: magnetic
- WEIGHT: 24g
- MATERIAL: Polycarbonate

$5.99
Keep the ARS fit system clear of debris and serves as a mount for LED taillight accessory. Note: not compatible with LifeBeam accessory.
Adds protection to keep ARS retention system clear of debris on Z1 helmet. Also allows the Z-LED or Century LED taillights to be used with the Z1 helmet.
- COMPATIBILITY: Z1
- ATTACHMENT: ARS mechanism
- WEIGHT: 8g
- MATERIAL: Polycarbonate

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads.
- COMPATIBILITY: Bullet, Bullet 2.0
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$6.99
Screws for Impala visor.
- COMPATIBILITY: Impala MIPS, Impala
- WEIGHT: 1g
- MATERIAL: Aluminum
Page 1 of 2
Next page