Skip to main content

Filter By:

Rear

$19.99
Shimano's Tourney long cage rear derailleur incorporates advanced Shimano functions and styling that sets the standard for entry level components. - TY model comes with resin bracket and plate body for reduced weight - Zinc-plated adjustment screws for corrosion resistance - MegaRange compatible - Includes frame hanger - Maximum cog size: 34t - Total capacity: 43t
$19.99
Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t
Lightweight 3D printed hollow oversize pulley wheels for Shimano Ultegra/Dura Ace (6800/7800/7900/7970/9000/9070), SRAM Red/Force/Rival/Apex, both 10s and 11s, electronical and mechanical (17/17-tooth), Shimano 8000/9100 series (13/19-tooth) and Campagnolo. The combination of 3D printed titanium oversized pulley wheels and coated CeramicSpeed Bearings result in the best pulley wheels in the world. Since the pulley wheels are the fastest spinning bearings on your bike, this CeramicSpeed upgrade is the most effective way to save energy or improve your time
Developed and designed entirely by CeramicSpeed the Oversized Pulley Wheel System for Campagnolo is advanced for the optimization of bike performance. Everything from bearings to the cage is made from the highest quality materials. The oversized aluminium pulley wheels are fitted with standard or coated CeramicSpeed Bearings, which reduce friction to the minimum. The 13/19-tooth OSPW for Campagnolo privides a 40% lower friction over a standard 11-tooth Campagnolo pulley wheel and fits up to a 32-tooth cassette. CeramicSpeed OSPW for Campagnolo is compatible with Record mechanical, Record EPS, Super Record mechanical, Super Record EPS, Chorus mechanical and Potenza mechanical. IMPORTANT: When travelling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit in most bike travel bags and could be damaged if left on. For correct mounting of the product, please find a manual and video here. Regarding the maintenance of your OSPW System, it is important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil by using the lubrication points on the back cage plate, so that oil can penetrate the bearing. Do this when you lubricate your chain, if you have washed your bike or after riding in wet or muddy conditions.
Designed for top performance on off-road Shimano XT/XTR derailleurs, these pulley wheels are developed to have a longer lifetime, even in the conditions provided by MTB riding, and deliver less friction. Thanks to the high-quality components CeramicSpeed uses, these pulleys are resistant to impact and perform at their best when going off-road. For extra protection when riding in wet and muddy weather, we recommend you to use the CeramicSpeed LongLife Grease instead of Oil. Aluminium Pulley Wheels Manufactured from a lightweight alluminium alloy, these CeramicSpeed Pulley Wheels are guaranteed to optimise your drivetrain efficiency whatever your off-road discipline.
$709.99 - $764.99
The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way. - SRAM AXS-enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately
$24.99
• 8-speed compatible • SIS rear index shifting • 43 tooth compatible
Developed and designed entirely by CeramicSpeed, the Oversized Pulley Wheel System for Shimano is advanced for the optimization of bike performance. Everything from bearings to the cage is made from the highest quality materials. The oversized aluminium pulley wheels are fitted with standard or coated CeramicSpeed Bearings, which reduce friction to the minimum. The overall power savings of the OSPW System for Shimano reach 30%-60% or more in some cases. The OSPW System has a lifetime that lasts 3-5 times longer than the commonly used standard pulleys on the market. The OSPW System for Shimano comes as two different systems, one compatible with Ultegra (6700/6770/6800/6870) and Dura Ace (7900/7970/9000/9070), 10s and 11s, electric and mechanical groupsets, and another compatible with the Shimano 9100/9150 and 8000 series - EXCEPT the R8000 GS. While the first option features a set of two 17-tooth pulleys, the OSPW System for Shimano 9100/9150 and 8000 features an optimal 13/19-tooth combination specially developed to fit the design of the derailleur. Find a list of compatability for OSPW for Shimano 9100/91500 and 8000 series here IMPORTANT: When travelling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit in most bike travel bags and could be damged if left on. The revolutionary OSPW System is developed, produced and assembled by hand in Denmark. The product is the result of an in-depth development process and has been designed for optimal performance. Like all other products delivered by CeramicSpeed, OSPW System has also undergone a thorough test program. We are proud to say that professional triathletes such as Tim Don and Tyler Butterfield have great feedback for the system and, along with Pro Continental teams, they have made it a permanent part of their equipment. Check out the FAQ page for more details about the OSPW System. Regarding the maintenance of your OSPW System, it is important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil by using the lubrication points on the back cage plate, so that oil can penetrate the bearing. Do this when you lubricate your chain, if you have washed your bike or after riding in wet or muddy conditions.
$279.99
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
$69.99
Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.
Upgrade your SRAM XX1/X01 rear derailleur with CeramicSpeed Pulley Wheels for reduced friction and extended lifetime. A breakthrough for SRAM’s MTB systems, the XX1 and X01 rear derailleurs included new tooth designs for both pulley wheels. Because of our commitment to compatibility, we have designed specific pulley wheels that function perfectly as upgrade replacements for the MTB 1x11 SRAM systems. Aluminium Pulley Wheels These aluminum alloy pulley wheels deliver a unique mix between low friction and long lifetime improving your performance when riding off-road with your favourite SRAM XX1 or X01 system. Titanium Pulley Wheels When it comes to the ultimate pulley wheels for off-road applications, the SRAM 1-11 titanium pulley wheels are by far the most efficient. Available with CeramicSpeed coated bearings, these pulley wheels feature increased resistance to corrosion, and the damaging effects of contaminating factors like water, salt, or dirt are eliminated. This is thanks to a special coating applied to the bearing’s races, which is 75% harder than hardened steel. In a friction test conducted by independent test lab Friction Facts, the CeramicSpeed Pulley Wheels came through as the lowest friction pulley wheels from a total of 19 market standards. See the complete results here. Mounting and maintenance It is very important to install and service these pulley wheels accordingly. Follow the video instructions for mounting of SRAM pulley wheels here. Maintenance is also required periodically. We recommend that you service your pulley wheels whenever you lubricate your chain, after washing your bike, or after riding in wet or muddy conditions. To do so, add CeramicSpeed Oil to the outside of the bearing seal, so that the oil can penetrate the bearing.
A world premiere and technological innovation, these hollow 3D printed titanium pulley wheels are 5-10% lighter than our original titanium Pulley Wheels and guarantee the same unparalleled lifetime and reduced friction. The combination of 3D printed titanium pulley wheels and coated CeramicSpeed Bearings result in the best pulley wheels in the world. Since the pulley wheels are the fastest spinning bearings on your bike, this CeramicSpeed upgrade is the most effective way to save energy or improve your time. The 3D printed titanium pulley wheels are extremely resistant to wear. This makes them a great choice if you ride in demanding conditions or just ride a lot. To give even greater protection and reduced friction, a super thin (2 microns) protective coating is applied to the bearing races. This further increases the resistance of the bearing to corrosion or damage from foreign objects. Compatible for all Shimano 11-speed rear derailleurs, including Shimano 9100-series rear derailleurs. Mounting and maintenance Just like every other bearing system, it is important that these pulley wheels are correctly mounted and maintained. For mounting instructions, watch this installation video. Maintain your pulley wheels periodically by adding oil to the outside of the bearing seal, so that oil can penetrate the bearing. This is recommended when you lubricate your chain, after cleaning your bike, or after riding in wet or muddy conditions. For further maintenance instructions, please watch this video. Do you want to know more about the development of these pulley wheels? Read more about it here.
The CeramicSpeed Eagle 14 Pulley Wheels have been designed to provide race precision shift performance and maximum drivetrain efficiency. Developed in partnership with Specialized S-Racing, CeramicSpeed Eagle 14 Pulley Wheels are the ideal substitute for SRAM factory standard pulley wheels, improving efficiency by 34.4% through a unique 14-tooth narrow-wide design. The Eagle 14 Pulley Wheels are designed as 14/14-tooth pulleys to obtain better shifting and less chain friction. The narrow-wide design adds further shifting performance and increased life time. The bearing race in the non-coated Eagle 14 Pulley Wheels is made of stainless steel to obtain even higher corrosion resistance and increased life time despite dirty riding conditions. Aluminium Pulley Wheels These aluminum alloy pulley wheels deliver a unique mix between low friction and long lifetime improving your performance when riding off-road with your SRAM Eagle 12-speed groupset. Titanium Pulley Wheels The Eagle 14 Pulley Wheels are available with CeramicSpeed Coated Bearings, which features increased resistance to corrosion and the damaging effects of contaminating factors like water, salt, or dirt are eliminated. This is thanks to a special coating applied to the bearing’s races, which is 75% harder than hardened steel.
Entirely developed, designed and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM is a technologic advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM, the power savings start at 40%, and the CeramicSpeed Bearing inside guarantee a 3-5 times longer lifetime and commonly used standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM start at 1.6 watts and up. IMPORTANT: When travelling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit in most bike travel bags and could be damaged if left on. Produced and assembled by hand in Denmark, the OSPW System has been developed to deliver optimal riding properties for either road, off-road or triathlon applications. Tested both on the road and in the lab, like all other CeramicSpeed products, the OSPW System for SRAM is proven to be better. Both professional triathletes as well as road teams have already chosen the OSPW System as a permanent part of their racing equipment convinced by the product properties. Check out the FAQ page for more details about the OSPW System. Remember to lubricate your CeramicSpeed Bearings properly in order to obtatin the optimal performance and the maximum longevity. When lubricating the chain, when washing your bike or after riding in wet/muddy conditions, it is recommended to lubricate the system’s bearings. To do so, add oil into the lubrication points on the back cage plate, so that oil can penetrate the bearing.
Upgrade your Shimano rear derailleur with CeramicSpeed Pulley Wheels for reduced friction and extended lifetime. The pulley wheels are the fastest spinning bearings on your bike, making an upgrade to CeramicSpeed an effective way to save energy. CeramicSpeed Pulley Wheels can be used for all cycling disciplines, and will last longer than any standard pulley wheels. The CeramicSpeed Pulley Wheels for Shimano rear derailleurs are specially designed to reduce friction to an absolute minimum, virtually eliminating the drag associated with standard pulley wheels. Compatible for all Shimano 11-speed rear derailleurs, including Shimano 9100-series rear derailleurs. Aluminium Pulley Wheels These pulley wheels are made from a light Aluminium alloy that guarantees top performance, whatever your riding discipline. All components of our pulley wheels are of the highest quality, ensuring the best results. Titanium Pulley Wheels To benefit from the ultimate pulley wheels when it comes to wear and tear, we have introduced the titanium pulley wheels, which are extremely resistant to wear. This makes them a great choice if you ride in demanding conditions – for example off-road, in wet or otherwise corrosive environments. The titanium pulley wheels are also available with coated bearings to reduce friction and prolong lifetime even further. The coated bearings are treated with a super thin (2 microns) protective layer that is applied to the bearing races. This increases the resistance of the bearing to corrosion even further, acting as a shield against the damage from foreign objects. Combining coated bearing races with a titanium pulley wheel creates a pulley wheel with extreme properties in terms of wear resistance and performance. In a test effectuated by Friction Facts, CeramicSpeed scored 0.033w, while Shimano Acera registered 1.370. With these results, the benefits are evident. See the test results here. To make sure that the pulley wheels perform at their best, it is important that your new pulley wheels are mounted correctly. Our videos will guide you through the process. *It is important that you properly lubricate your bearings in order to ensure optimum performance and maximum longevity. Add oil to the outside of the bearing seal, so the oil can penetrate the bearing. Maintenance for your CeramicSpeed Pulley Wheels is recommended every time you lubricate your chain, wash your bike, or after riding in wet or muddy conditions.
$86.36
Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible
$55.99
Shimano's Tiagra Rear Derailleur GS (10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: RD-4700-GS - Series: Tiagra - Cassette Compatibility: 10 - Maximum Sprocket: low sprocket: 34T / top sprocket: 12T (front double) / 20T low sprocket: 32T / top sprocket: 12T (front triple) - Minimum Sprocket: low sprocket: 28T / top sprocket: 11T (front double) / 20T low sprocket: 25T / top sprocket: 11T (front triple) - Maximum Front Difference: 16T (front double) / 20T (front triple) - Total Capacity: 39T (front double) / 41T (front triple)
Page 1 of 1